Photo courtesy of Inchworm Gear
Still running that stock chain driven transfer case? Want to change your driveshaft Bolt pattern but can't find a flange? One of these little goodies should help out. There are no multi drilled flanges available for the Tacoma, V6, or Pre 95 Automatic T-cases. Inchworm Gear Driveshaft Flange Adapters allow you to bolt up the driveshaft you want to the flange you already have.
There are 3 large bolt driveshaft bolt patterns:
1: Standard Ujoint - 60mm Square Pattern
2: Front CV Pattern
3: Turbo Ujoint - 66mm Square Pattern - Also found on some Rear CVs as well as later model Tacomas and FJ Cruisers.
The adapter that bolts to your flange will provide you with the other two bolt patterns. For more information about our Driveshaft Flange Adapters contact Inchworm Gear at 530 677-8111 or look them up on the web at www.inchwormgear.com.