Not only does it save time, but the secure pinch-bolt design eliminates pesky traditional jam nuts that always come loose.
"Simply loosen the Pinch Bolt, twist the Adjuster Sleeve, and then tighten the Pinch Bolt, and your done!"
The Double Adjuster Tube Adapter is ideal for steering and link suspension designs with weld-on bushings/joints at one end. Bent link applications are also ideal, as the double adjuster tube adapter provides precise adjustment without twisting the link out of position. Common applications are: custom tie-rods, control arms, drag links, track bars, trailing arms, and 3 or 4-link suspensions.
The weld-on Tube Adapter is manufactured of solid 1018 steel and when installed, it seals the tube from water and debris preventing corrosion damage from within the tube.
Poly Performance Double Adjuster Tube Adapters are available in 5 sizes, 7/8"-14 for 1" ID tube, 7/8"-18 for 1" ID tube, 1"-14 for 1 1/4" ID tube, 1 1/4" for 1 3/8" ID tube, and 1 1/4" for 1 1/2" ID tube. Each set is sold with one Weld-on Tube Adapter, one Zinc plated Double Adjuster Sleeve and 1/2" Pinch Bolt hardware.